HIKVISION DS-KH7300EY Series - Change System Language

Figure 8-11 Time Synchronizaon
1) Select the Time Zone.
2) Enable Enable NTP.
3) Set the synchronizing interval, enter the IP address/domain of NTP server and port No.
Note
●
The default unit of synchronizing interval is minute.
●
The me zone can be congured as well if the NTP is not enabled.
8.11 Change System Language
Steps
1.
Tap
Sengs → to enter the General Sengs page.
DS-KH7300EY Series Indoor Staon User Manual
26