HIKVISION DS-KH9510-WTE1 User Manual

DS-KH9510-WTE1 Video Intercom Indoor Station User Manual
UM DS-KH9510-WTE1 Video Intercom 031821NA 13
Steps
1. Tap → One-Push to Disarm to disarm.
2. Enter the arm/disarm password.
3. Tap OK.
Arming Mode Settings
Four arming modes can be configured: stay mode, away mode, sleeping mode, and custom mode.
Before You Start
1. Tap Settings → → Shortcut Settings to enable Zone Alarm Locally.
Arming status page and zone settings page are hidden by default. You should enable
the alarm function first.
2. Tap Settings → → Scene Settings to enter the arming mode settings page.
3. Tap Stay Mode, Away Mode, Sleeping Mode, or Custom to enter the page.
Figure 7, Arming Mode Settings
4. Arm the selected zone.
Zones are configurable on the arming mode page.
24H alarm zone including smoke detector zone and gas detector zone will be triggered
even if they are disabled.
Arming mode settings should be configured with the settings of arming status on the
user page of the device.

HIKVISION DS-KH9510-WTE1 Specifications

General

Product type	Master station
Product color	White
Display resolution	1024 x 600 pixels
Brand compatibility	Hikvision
Quantity per pack	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C

Weight and Dimensions

Depth	166 mm
Width	254 mm
Height	26.65 mm