HIKVISION DS-KV6113 Series - Surface Mounting Without Protective Shield; Preparation and Steps

3.2 Surface Mounng without Protecve Shield
Before You Start
•
Tools that you need to prepare for
installaon: Drill (ø2.846) and gradienter.
•
Purchase the protecve shield before installaon.
Steps
1.
Sck the mounng template on the wall. Drill screw holes according to the
mounng template. Remove the template from the wall.
Figure 3-2
Mounng Template
2.
Secure the
mounng plate on the wall with 4 supplied screws according to the
screw holes.
3.
Install the villa door staon to the mounng plate. Fix the device on the
mounng plate with the set screw.
Video Intercom Villa Door
Staon User Manual
7