EasyManuals Logo

HIKVISION DS-KV6113 Series User Manual

HIKVISION DS-KV6113 Series
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
Arming/Disarming Informaon
Click User Management → Arming/Disarming Informaon to view the
informaon. Click Refresh to get the present informaon.
5.3.3 Network Sengs
TCP/IP Sengs
TCP/IP sengs must be properly congured before you operate the device over
network. The device supports IPv4.
Steps
1.
Click Network → Basic Sengs → TCP/IP to enter the sengs page.
Figure 5-5 TCP/IP Sengs
2.
Congure the network parameters.
-
Check DHCP, the device will get the parameters automacally.
-
Set the IPv4 Address, IPv4 Subnet Mask and IPv4 Default Gateway
manually.
3.
Congure the DNS server.
4.
Click Save to enable the
sengs.
Port
Sengs
Video Intercom Villa Door Staon User Manual
19

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-KV6113 Series and is the answer not in the manual?

HIKVISION DS-KV6113 Series Specifications

General IconGeneral
Audio Bit Rate64 Kbps
Ingress ProtectionIP65
Operation SystemEmbedded Linux
Camera2 MP
Resolution1920 × 1080
Frame Rate25/30 fps
Video CompressionH.264
Audio InputBuilt-in microphone
Audio OutputBuilt-in speaker
Network ProtocolTCP/IP, RTSP
Interface1 RJ45 10/100 Mbps Self-Adaptive Ethernet Interface
Relay Output1
RS-4851
Power SupplyDC 12V
Operating Humidity10% to 90%
Power Consumption≤12 W

Related product manuals