HIKVISION DS-KV6113 Series - Network Services Configuration; Port, Wi-Fi, and SIP Settings

Steps
1.
Click Network → Basic Sengs → Port to enter the sengs page.
Figure 5-6 Port Sengs
2.
Set the ports of the device.
HTTP Port
The default port number is 80, and it can be changed to any port No. which
is not occupied.
RTSP Port
The default port number is 554 and it can be changed to any port No. ranges
from 1 to 65535.
Server Port
The default server port number is 8000, and it can be changed to any port
No. ranges from 2000 to 65535.
3.
Click Save to enable the
sengs.
Wi-Fi Sengs
Steps
1.
Click Network → Basic
Sengs → Wi-Fi Sengs to enter the sengs page.
2.
Enter the SSID and Password of the Wi-Fi.
3.
Select Security Mode.
4.
Click Connect.
SIP
Seng
Steps
1.
Click Network → Basic
Sengs → SIP to enter the sengs page.
2.
Check Enable VOIP Gateway.
3.
Congure the SIP parameters.
Video Intercom Villa Door
Staon User Manual
20