HIKVISION DS-KV6113 Series User Manual

3.
Select Server Type.
4.
Input the Server IP Address and Port.
5.
Congure the FTP Sengs, and the user name and password are required for the
server login.
6.
Set the Directory Structure, Parent Directory and Child Directory.
7.
Set the picture naming rules.
8.
Click Save to enable the sengs.
Plaorm Access
Plaorm access provides you an opon to manage the devices via plaorm.
Steps
1.
Click Network → Advanced Sengs → Plaorm Access to enter the sengs
page.
2.
Check the checkbox of Enable to enable the funcon.
3.
Select the Plaorm Access Mode.
Note
Hik-Connect is an applicaon for mobile devices. With the App, you can view live
image of the device, receive alarm nocaon and so on.
4.
Create a Stream Encrypon/Encrypon for the device.
Note
6 to 12 leers (a to z, A to Z) or numbers (0 to 9), case sensive. You are
recommended to use a combinaon of no less than 8 leers or numbers.
5.
Click Save to enable the sengs.
Linked Network
Sengs
Enter a short descripon of your task here (oponal).
Steps
1.
Click Network → Advanced
Sengs → Other to enter the sengs page.
Video Intercom Villa Door
Staon User Manual
23

HIKVISION DS-KV6113 Series Specifications

General

Audio Bit Rate	64 Kbps
Ingress Protection	IP65
Operation System	Embedded Linux
Camera	2 MP
Resolution	1920 × 1080
Frame Rate	25/30 fps
Video Compression	H.264
Audio Input	Built-in microphone
Audio Output	Built-in speaker
Network Protocol	TCP/IP, RTSP
Interface	1 RJ45 10/100 Mbps Self-Adaptive Ethernet Interface
Relay Output	1
RS-485	1
Power Supply	DC 12V
Operating Humidity	10% to 90%
Power Consumption	≤12 W