HIKVISION DS-KV6113 Series - Image and Event Settings; OSD Settings; Motion Detection

Figure 5-11 Display Sengs
2.
Select the Format.
3.
Set the display parameters.
WDR
Wide Dynamic Range can be used when there is a high contrast of the bright
area and the dark area of the scene.
Brightness
Brightness describes bright of the image, which ranges from 1 to 100.
Contrast
Contrast describes the contrast of the image, which ranges from 1 to 100.
Saturaon
Saturaon describes the colorfulness of the image color, which ranges from 1
to 100.
Sharpness
Sharpness describes the edge contrast of the image, which ranges from 1 to
100.
BLC Area
If you focus on an object against strong backlight, the object will be too dark
to be seen clearly. BLC compensates light to the object in the front to make it
clear. OFF, Up, Down,
Le, Right and Center are selectable.
4.
Click Save to enable the sengs.
OSD
Sengs
Video Intercom Villa Door Staon User Manual
27