EasyManuals Logo
Home>HIKVISION>Intercom System>DS-KV6113-WPE1

HIKVISION DS-KV6113-WPE1 User Manual

HIKVISION DS-KV6113-WPE1
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
Video Intercom Villa Door Station User Manual
34
Ring-Back Tone Settings
Click Intercom Ringbacktone Settings to enter the settings page.
Click Add to select the ring tone from PC.
Note
Available Audio Format: WAVAAC, Size: Less than 600 KB, Sample Rate: 8000Hz, Mono.
Press Button to Call
Steps
1. Go to Intercom Press Button to Call to enter the settings page.
2. Check Call Indoor Station or Call Management Center as the button call target.
Note
If you check Call Indoor Station, you should enter the call indoor station No.
3. Click Save.
Input and Output
Go to Intercom I/O Settings to enter the settings page.
Figure 5-16 IO Input and Output
Select I/O Input No., Input, I/O Output No. and Output.
Click Save to enable the settings.
5.5.9 Access Control Settings
Door Parameters
Steps
1. Click Access Control Door Parameters to enter the settings page.

Other manuals for HIKVISION DS-KV6113-WPE1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-KV6113-WPE1 and is the answer not in the manual?

HIKVISION DS-KV6113-WPE1 Specifications

General IconGeneral
Product typeCamera module
Product colorBlack
Brand compatibilityHikvision
Operating temperature (T-T)-40 - 55 °C
Weight and Dimensions IconWeight and Dimensions
Depth27 mm
Width65 mm
Height138 mm
Weight265 g

Related product manuals