Body Camera Quick Start Guide
12
Chapter 3 Basic Operations
3.1 Start up
Before you start
Ensure the power is sufficient. If not, charge the body camera. Refer to Chapter 1.3
Charge Body Camera for details.
Step
Hold the On/Off button for 3 seconds. Then LED 2 turns green, and after 10 seconds,
the HIKVISION logo pops up. You will hear an audible notification. All of these
indicate the body camera starts successfully. Then it automatically enters the live
view interface.
You can also hold the Recording button for 3 seconds to start up the body camera
and start recording at the same time.
To Next Page
Loading...
Need help?
General
