HIKVISION DS-PDPG12P-EG2-WB - Page 3

4. Install the Detector
Note: The addional force shall be equal to three mes the weight of the equipment but not less than 50N. The equipment
and its associated mounng means shall remain secure during the installaon. Aer the installaon, the equipment,
including any associated mounng plate, shall not be damaged.
with Screws
a. Knock out the screw holes on the rear panel.
3. Adjust the pick-up direcon
a. knock out the sheet on the pick-up hole at the required side.
b. Toggle the joysck to adjust the pick-up direcon.
Note: Please mount the detector with supplied screws or those in the same specificaon as the supplied one.
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
b. Secure the rear panel on the wall with four screws.
3
a b