HIKVISION DS-PDTPH-E-WE - Page 3

3. Install the Detector.
2. Connect the probe cable.
Secure the mounng plate on the wall with supplied screws or sponge tape.
6
3
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
Set Up with App
5
You can view the device status including temperature, signal intensity, baery level, lid, etc.,on the device page.
Tap the buon to enter the sengs page.
Formang
4 Applicaon
Hold the TAMPER buon and power the detector on at the same me.
The signal indicator will be dim out when the formang is completed.
Screw Mounng
Sponge tape mounng
b
. . . . . .
Note: The humidity detecon will be disabled when using probe.
......
Standalone Work Work with Probe