HIKVISION DS-PDTT15AM-LM-WB - Device Enrollment; Enrollment Preparation; Enroll Peripheral Locally; Enroll Peripheral via QR;Serial

3
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
12
13
14
1. Enrollment succeeded: Flash green for 7 times.
Note: The front panel should be installed before powering on successfully.
2. Check signal Strength
Solid Green for 3 s - Strong Signal
Solid Orange for 3 s - Medium Signal
Solid Red for 3 s - Weak Signal
Flash Red for 6 times - Lost Signal
3
Enrollment
1
2
Signal Strength Test
11. Enrollment
Enrollment Preparation
Log in to the APP Store, download and install the App.
Power on the security control panel.
Log in the APP and tap the icon "+". Scan the QR code or input the control panel serial No. to add the control panel.
In the APP, tap the "Enrollment Mode" button on the control panel page to make the control
panel enter the enrollment status.
1
Enroll the Peripheral Locally
2
Enroll the Peripheral with QR and serial No.
In the APP, tap the icon "+" and scan the QR code or serial No. on the peripheral.
12-13. Install the front panel back.
14. Push the top and bottom covers back.
xxxx
Device