HIKVISION DS-PHA20-P User Manual

Figure 4-28 Set Email to Receive Alarm Video
3. Click the block to enable the funcon.
4. Enter the sender's informaon.
Note
It is recommended to use Gmail and Hotmail for sending mails.
5. Enter the receiver's informaon.
6. Click Receiver Address Test and make sure the address is correct.
7. Click Save.
Set Video Parameters
Steps
1. In the client
soware, select the device on the Device Management page and click , or enter
the device IP address in the address bar of the web browser and log in.
2. Click Conguraon → Video & Audio → Event Video Parameters to enter the page.
Hybrid Security Control Panel User Manual
45

HIKVISION DS-PHA20-P Specifications

General

Brand	HIKVISION
Model	DS-PHA20-P
Category	Control Panel
Language	English