HIKVISION DS-PHA20-P User Manual

Steps
Note
Make sure the keyfob's frequency is the same as the control panel's.
1.
On the device list page, tap the security control panel and then log in to the device (if required)
to enter the control panel page.
2. Tap
to enter the Scan QR Code page.
3. Tap Add Keyfob.
4.
Follow the
instrucon on the page and press any key on the keyfob to add.
5. Create a name for the keyfob and tap Finish.
The keyfob is listed in the Wireless Device page.
6.
Oponal: You can view the keyfob's serial No. and you can also delete it.
4.3.7 User Management
Steps
1. On the device list page, tap the security control panel and then log in to the device (if required)
to enter the control panel page.
2. Tap
→ User Management → User .
Figure 4-43 User Managment
3. Tap Add User.
Hybrid Security Control Panel User Manual
68

HIKVISION DS-PHA20-P Specifications

General

Brand	HIKVISION
Model	DS-PHA20-P
Category	Control Panel
Language	English