What to do if zone is offline on HIKVISION Control Panel?
If a zone is offline on your HIKVISION Control Panel, check whether the detector reports undervoltage and replace the detector battery.
General| Model | DS-PHA64-M |
|---|---|
| Type | Control Panel |
| Zone Capacity | 64 |
| Wireless Zones | 56 |
| Power Consumption | ≤ 10 W |
| Operating Humidity | 10% to 90% (non-condensing) |
| Material | Plastic |
| Housing Material | ABS |
| Installation | Wall-mounted |
| Wired Zones | 8 |
| Partitions | 8 |
| Wired Sirens | 1 |
| Communication | Ethernet |
| Protocols | TCP/IP |
| Operating Temperature | -10°C to 55°C |
| Wired Outputs | 2 (Onboard) |
| Power Supply | AC 110V-240V |
Settings for wired, Wi-Fi, and cellular network communication.
Managing zones, sounders, outputs, keypads, and modules.
Configuring area settings, linking zones, and scheduling.
Managing user accounts, keyfobs, and cards for security.
Managing device information, authority, and system options.
Operating the control panel using the mobile client application.
To Next Page
