Configuration tool: IRS60-3 Fall Detection Tool V3.0.3
firmware and configuration tool：
https://one.hikvision.com/#/link/4HQuwNxg0OhGeGvzPflY 提取密码：hpne
OTAP SDK package：
https://one.hikvision.com/#/link/zjVtFXvPPBYrpjaBWgnf 提取密码：PxeJ
1.2 Application Scenarios
Fall detection radar can be applied to private spaces, such as shower rooms, rest rooms and bed
rooms. It can also be used in elderly care, home, community, and other fields to promptly alarm when
it detects falls and reduce personal injury.
Bed room rest room
2 Fall Detection Radar Configuration
Before integration, we need to install radar according to the installation requirement.
2.1 Radar Installation
Please follow below steps to install the radar.
Choose a wall with no obstructions in front.
The radar is installed at a height of 2m and the detection area is centered horizontally
The rear of the radar panel is close to the wall. Ensure that the front of the radar panel is
tilted down by 45°.
To Next Page
Loading...
