1 5 A C C E S S I N G B Y W E B B R O W S E R ( c o n t i n u e d )
You shall acknowledge that the use of the product with
Internet access might be under network security risks.
For avoidance of any network attacks and information
leakage, please strengthen your own protection. If the
product does not work properly, contact your dealer or
the nearest service center.
1. Open Web browser.
2. Enter the IP address of the device.
3. Press Enter.
• If the device has not been activated, you must
first activate the device by setting the admin
user account password.
• If the device is already activated, enter the user
name and password in the login interface, and
click Login.
before viewing the live video and managing the
camera.
Close the Web browser to finish the plug-in
installation.
After login, you can operate and configure
the device, including using live view,
playback, log search, configuration, etc.
16 B A C K U P V I D E O R E C O R D I N G S A N D C L I P S
Back up recorded video clips to ensure important video is not lost or destroyed.
• Choose Recorded Video Clips to Back Up
1. Connect a USB flash drive, HDD, or DVD writer to an available USB port (mandatory).
2. Go to Menu > Playback.
3. Select cameras for playback.
4. Select the beginning date and time of the incident.
5. Click START CLIPPING icon.
6. Select the ending time of the incident.
7. Click END CLIPPING icon (same as START CLIPPING). Clip will be marked.
8. Repeat steps 1-6 as many times as required.
9. Click FILE MANAGEMENT icon to display a new window containing all marked clips.
10. Select the desired clips.
11. Click EXPORT to save files to the inserted USB device.
To Next Page
Loading...
Need help?
General