HIKVISION HiLook IPC-B120H-U - Activation Via SADP Software

Network Bullet Camera·Quick Start Guide
26
5. Click OK to save the password and enter the live view interface.
Activation via SADP Software
SADP software is used for detecting the online device, activating the
camera, and resetting the password.
Get the SADP software from the supplied disk or the official website,
and install the SADP according to the prompts.
Follow the steps to activate the camera.
Steps:
1. Run the SADP software to search the online devices.
2. Check the device status from the device list, and select the
inactive device.
Select inactive device.
Input and confirm
password.
SADP Interface
Note:
The SADP software supports activating the camera in batch. Refer
to the user manual of SADP software for details.