HiLookVision Setup
Steps:
1. Download and install the HiLookVision app by searching
"HiLookVision" in App Store or Google Play
TM
.
2. Launch the app and register for a HiLookVision user account.
3. Log in HiLookVision app after registration.
Add Camera to HiLookVision
Before you start:
You need to enable the HiLookVision service on camera before
adding it to your HiLookVision account. Refer to Chapter 5.1.
Steps:
1. Use a network cable to connect the camera with a router if the
camera does not support Wi-Fi.
Figure 5-3 Connect a Router
Note:
After the camera connects to the network, please wait one minute
before any operation on the camera using HiLookVision app.
2. In the HiLookVision app, tap "+" on the upper-right corner and
then scan the QR code of the camera to add the camera.
To Next Page
Loading...
