5 Operate via HiLookVision App
Purpose:
HiLookVision is an application for mobile devices. With the App, you
can view live image of the camera, receive alarm notification and so
on.
Note:
HiLookVision service is not supported by certain camera models.
Enable HiLookVision Service on Camera
Purpose:
HiLookVision service should be enabled on your camera before using
the service.
You can enable the service through SADP software or web browser.
Enable HiLookVision Service via SADP Software
Steps:
1. Check the checkbox of Enable HiLookVision on:
1). "Activate the Device" page during camera activation, refer to
Chapter 3.2.2.
2). Or "Modify Network Parameters" page during modifying IP
address, refer to Chapter 3.3.
2. Create a verification code or change the verification code.
To Next Page
Loading...
