HIKVISION HiLook IPC-B120H-U User Manual

Network Bullet Camera·Quick Start Guide
28
1. Run the SADP software.
2. Select an active device.
3. Change the device IP address to the same subnet with your
computer by either modifying the IP address manually or checking
the checkbox of Enable DHCP.
Modify the IP Address
Note:
You can enable the HiLookVision service for the device during
activation. Refer to Chapter 5.1 for detailed information.

HIKVISION HiLook IPC-B120H-U Specifications

General

Brand	HIKVISION
Model	HiLook IPC-B120H-U
Category	Security Camera
Language	English