Digital/Network Video Recorder Quick Start Guide
12
3.10 Recording Settings
Before you start
Make sure that the disk has already been installed. If not, please install a disk and initialize it. You may refer to
the user manual for detailed information.
Purpose
Two kinds of record types are introduced in the following section, including Instant Record and All-Day Record.
And for other record types, you may refer to the user manual for detailed information.
After rebooting all the manual records enabled are canceled.
Step 1 Click Start Recording from the
right-click menu.
Step 2 Select Continuous Record or
Motion Detection Record on your
demand.
Step 3 Click Yes in the pop-up box to
confirm the settings.
To Next Page
Loading...
