Network PTZ Camera·Quick Start Guide
2 Installation
Before you start:
Check the package contents and make sure that the device in the
package is i n good condition and all the assembly parts are included.
Note:
Do not power the camera up until the installation is finished. To
ensure the safety of personnel and equipment, all the installation
steps should be done when power supply is off.
2.1 Installing the Memory Card
Purpose:
(Optional) You can install the memory card for local storage.
Steps:
1. Rotate the installation plate anticlockwise to separate it from
the camera as shown in Figure 2-1.
Note:
Keep the installation plate for camera mounting.
To Next Page
Loading...
