HIKVISION HiLook User Manual

Network PTZ Camera·Quick Start Guide
13
网络交换机
Network Cable
Network Cable
or
Network PTZ Camera
Computer
Figure 3-2 Connecting via a Switch or a Router
3.2 Activating the Camera
Purpose:
You are required to activate the camera first by setting a strong
password for it before you can use the camera.
Activation via web browser, activation via SADP, a nd activation via
client software are supported. We will take activation via SADP
software and activation via web browser as examples to introduce
the camera activation.
Note:
For the details of activation via client software, refer to the user
ma nual of the network camera.
3.2.1 Activation via Web Browser
Steps
1. Power on the camera. Connect the camera to your computer or
the switch/router which your computer connects to.

HIKVISION HiLook Specifications

General

Image Sensor	1/2.7" Progressive Scan CMOS
Ingress Protection	IP67
Operating Temperature	-30 °C to 60 °C (-22 °F to 140 °F)
Resolution	1920 × 1080
IR Range	Up to 30 m
Power Supply	DC 12V ±25% / PoE (varies by model)
Weather Resistance	Yes
Lens	2.8mm fixed lens (varies by model)