HIKVISION HiLook User Manual

Network PTZ Camera·Quick Start Guide
14
2. Input the IP address into the address bar of the web browser,
and enter the activation interface.
Notes:
 The default IP address of the camera is 192.168.1.64.
 The computer and the camera should belong to the same
subnet.
 For the camera enables the DHCP by default, you need to use
the SADP software to search the IP address.
3. Create a password and input the password into the password
fi eld.
STRONG PASSWORD RECOMMENDED– We highly
recommend you create a strong password of your own
choosing (using a minimum of 8 characters, including at
least three of the following categories: upper case letters,
lower case letters, numbers, and special characters) in
order to increase the security of your product. And we
recommend you reset your password regularly, especially
in the high security system, resetting the password
monthly or weekly can better protect your product.
4. Confirm the password.
5. Click OK to activate the camera and enter the live view
interface.

HIKVISION HiLook Specifications

General

Image Sensor	1/2.7" Progressive Scan CMOS
Ingress Protection	IP67
Operating Temperature	-30 °C to 60 °C (-22 °F to 140 °F)
Resolution	1920 × 1080
IR Range	Up to 30 m
Power Supply	DC 12V ±25% / PoE (varies by model)
Weather Resistance	Yes
Lens	2.8mm fixed lens (varies by model)