HIKVISION HiLook User Manual

Network PTZ Camera·Quick Start Guide
4
OPEN
Figure 2-1 Remove the Installation Plate
2. Insert the memory card into the memory card slot as shown i n
Figure 2-2.
Figure 2-2 Ins ert the Memory Card
2.2 Ceiling Mounting
Before you start:
 The thickness of the ceiling shall be no less than 5 mm.

HIKVISION HiLook Specifications

General

Image Sensor	1/2.7" Progressive Scan CMOS
Ingress Protection	IP67
Operating Temperature	-30 °C to 60 °C (-22 °F to 140 °F)
Resolution	1920 × 1080
IR Range	Up to 30 m
Power Supply	DC 12V ±25% / PoE (varies by model)
Weather Resistance	Yes
Lens	2.8mm fixed lens (varies by model)