HIKVISION HiLook User Manual

Network PTZ Camera·Quick Start Guide
18
Steps:
1. Run the SADP software.
2. Sel ect an active device.
3. Cha nge the device IP address to the same subnet with your
computer by either modifying the IP address manually or
checking Enable DHCP.
Figure 3-4 Modi fy the IP Addres s
4. Input the admin password and click Modify to activate your IP
address modification. The batch IP address modification is

HIKVISION HiLook Specifications

General

Image Sensor	1/2.7" Progressive Scan CMOS
Ingress Protection	IP67
Operating Temperature	-30 °C to 60 °C (-22 °F to 140 °F)
Resolution	1920 × 1080
IR Range	Up to 30 m
Power Supply	DC 12V ±25% / PoE (varies by model)
Weather Resistance	Yes
Lens	2.8mm fixed lens (varies by model)