Smart ATM Protection System Quick Start Guide
19
Wearing sunglasses detection: When a person is operating before the ATM, and the camera
detects the person is wearing sunglasses or glasses with dark color lens, the DVR will alarm.
Using mobile phone detection: When a person is operating before the ATM, and the camera
detects the person is using mobile phone near the ear, the DVR will alarm.
Before you start
Allocate a camera for human face mode. Refer to 2.1 Smart ATM Resources Allocation for details.
Step 1 Click VCA Config.
Step 2 Select the camera you have allocated for human face mode. The basic device information
and VCA type will be displayed on the right.
Step 3 Configure capture and display. Refer to 2.2.1 Panel Mode for details.
Step 4 (Optional) Configure the shield region. Refer to 2.2.1 Panel Mode for details.
Step 5 Configure rules.
1) Go to Rule > Rule Settings.
2) Set Rule Type.
3) Click , , or to draw the human face detection region. It is recommeded to
click to the draw detection region as full-screen.
4) (Optional) Click / to draw the maximum/minimum filtering size of the human
face. It is recommended to use 0 for size filtering, which the device will automatically
calculate and set the filtering size.
5) Click Save to save the settings.
To Next Page
Loading...
