HIKVISION iDS-7204AHQHI-M1 - Edit an Operator;Guest User; Manage User Permissions; Set User Permissions

9. Click OK to save the
sengs.
10.1.3 Edit an Operator/Guest User
You can edit the user informaon, including user name, password, permission level, and MAC
address.
Steps
1. Go to System → User .
2. Select a user from the list and click Modify.
Figure 10-2 Edit User (Operator/Guest)
3. Edit the user informaon as desired, including the new password (strong password is required)
and MAC address.
4. Click OK.
10.2 Manage User Permissions
10.2.1 Set User Permissions
For an added user, you can assign the dierent permissions, including local and remote operaon
of the device.
Steps
1. Go to System → User .
2. Select a user from the list, and then click
to enter the permission sengs interface.
ATM Digital Video Recorder User Manual
76