HIKVISION iDS-7204AHQHI-M1 - Call a Patrol; Set a Pattern

Operaon Descripon Operaon Descripon
Select a key
point to delete.
Edit the added
key point.
Adjust the key
point order
Adjust the key
point order
7. Click Apply to save the patrol sengs.
2.3.5 Call a Patrol
Calling a patrol makes the PTZ move according to the predened patrol path.
Steps
1. Click on the quick sengs toolbar of the PTZ camera's live view.
2. Click Patrol on the PTZ control panel.
Figure 2-11 Patrol Conguraon
3. Select a patrol.
4. Click Call to start the patrol.
5. Oponal: Click Stop to stop the patrol.
2.3.6 Set a
Paern
Paerns can be set by recording the movement of the PTZ. You can call the paern to make the
PTZ move according to the
predened path.
Steps
1. Click on the quick sengs toolbar of the PTZ camera's live view.
2. Click Paern to congure a paern.
ATM Digital Video Recorder User Manual
17