Digital Video Recorder User Manual
80
4. Optional: You can select channels that require picture capture. The unselected channels will not
capture picture.
1) Click at the left bottom of live view interface.
2) Select channel(s), the checked channel(s) will capture picture. All channels are selected as
default.
3) Click Finish.
5.10 View People Counting Statistics
People counting statistics calculates the number of people entering or leaving a certain configured
area and creates daily/weekly/monthly/annual reports for analysis.
Steps
1. Go to Smart Analysis → Smart Report → Counting via local device GUI.
2. Select a camera.
3. Select the report type.
4. Set Date to analyze. The people counting graphic will show.
Figure 5-13 People Counting Interface
5. Optional: Click Export to export the report in Microsoft Excel format.
5.11 Heat Map
Heat Map is a graphical representation of data. The heat map function is used to analyze how
many people visited and stayed in a specific area.
Before You Start
The Heat Map function must be supported by the connected IP camera and the corresponding
configuration must be set.
Steps
1. Go to Smart Analysis → Heat Map.
2. Select a camera.
3. Select the report type.
To Next Page
Loading...
