Digital Video Recorder User Manual
90
Figure 6-8 PIR Alarm
3. Select a camera to configure.
4. Check PIR Alarm.
5. Optional: Check Save VCA Picture to save the captured of PIR alarm pictures.
6. Set the arming schedule. Refer to Configure Arming Schedule.
7. Set the linkage actions. Refer to Configure Linkage Actions.
8. Click Apply.
6.3 Configure Arming Schedule
Steps
1. Click Arming Schedule.
2. Click Edit.
3. Select a day of the week and set the time period. Up to eight time periods can be set each day.
Note
Time periods cannot repeat or overlapped.
To Next Page
Loading...
