Digital Video Recorder User Manual
63
Figure 5-3 Facial Detection
3. Select a camera to configure.
4. Check Enable Face Detection.
5. Optional: Check Save VCA Picture to save the captured pictures of face detection.
6. Set the detection sensitivity. Sensitivity range: [1-5]. The higher the value is, the more easily the
face will be detected.
7. Set the arming schedule. Refer to Configure Arming Schedule
8. Set linkage actions. Refer to Configure Linkage Actions
9. Click Apply.
5.4.2 Face Picture Library Management
Face picture library is mainly used for face picture storage and face picture comparison.
Add a Face Picture Library
You can create face picture libraries via local GUI or Hik-Connect app. Here we take the operations
on local GUI as an example.
Steps
1. Go to Smart Analysis → Face Picture Database.
2. Click .
3. Enter the face picture library name.
4. Click OK.
To Next Page
Loading...
