Network Video Recorder User Manual
93
Figure 7-6 Face Picture Comparison
4. Set Mode as Face Picture Comparison.
5. Optional: Check Enable Non-Real-Time Mode. For places with a high flow of people, the device
processing speed may not be fast enough, Non-Real-Time Mode will save the real-time pictures
as cache, and process them later when engine has free resource. After enabling this function, all
channels will be able to support face picture comparison.
Note
● When Non-Real-Time Mode is enabled, the linkage method will only support Notify
Surveillance Center.
● Non-Real-Time Mode will not trigger real-time alarm, so Arming Schedule is unavailable.
● You can search the comparison event results in File Management → Smart Search → Face
Search → Search by Event.
6. Check Enable Face Picture Comparison.
To Next Page
Loading...
