EasyManua.ls Logo

HIKVISION iDS-9664NXI-M8/X - Schedule Reboot; Security Management; Configure ONVIF; IP;MAC Address Filter

HIKVISION iDS-9664NXI-M8/X
233 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Network Video Recorder User Manual
200
15.12 Schedule Reboot
The device will automatically restart according to the schedule.
Steps
1. Go to Maintenance System Service System Service Schedule Reboot.
2. Check Enable.
3. Set the reboot schedule.
4. Click Apply.
15.13 Security Management
15.13.1 Configure ONVIF
ONVIF protocol allows the connection with third-party cameras. The added user accounts have the
permission to connect other devices via ONVIF protocol.
Steps
1. Go to Maintenance System Service ONVIF.
2. Check Enable ONVIF to enable the ONVIF access management.
Note
ONVIF protocol is disabled by default.
3. Click Add.
4. Enter User Name, and Password
Caution
We highly recommend you create a strong password of your own choosing (Using a minimum of
8 characters, including at least three of the following categories: upper case letters, lower case
letters, numbers, and special characters.) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
5. Select Level as Media User, Operator or Admin.
6. Click OK.
15.13.2 IP/MAC Address Filter
The address filter decides whether to allow or forbid specific IP/MAC address to get access to your

Table of Contents

Related product manuals