Network Video Recorder User Manual
51
Figure 4-3 Edit Holiday Settings
5. Set Holiday Name, Mode, Start Date, and End Date.
6. Click OK.
7. Set the schedule for holiday recording. Refer to Configure Recording Schedule for details.
4.1.12 Configure Redundant Recording and Capture
Enabling redundant recording and capture, which means saving the record files and captured
pictures not only in the R/W HDD but also in the redundant HDD, will effectively enhance the data
safety and reliability.
Before You Start
You must set the storage mode to Group before you set the HDD property to Redundancy. For
detailed information, refer to Configure HDD Group. There should be at least another HDD which
is in Read/Write status.
Steps
1. Go to Storage → Storage Device.
2. Select a HDD from the list and click to enter the Local HDD Settings interface.
3. Set the HDD property to Redundancy.
4. Go to Storage → Schedule Settings → Record Schedule/Capture Schedule.
5. Click Advanced to set the camera recording parameters.
To Next Page
Loading...
