Network Video Recorder User Manual
14
Figure 1-13 Edit Network Camera
3. Select Adding Method as Manual.
Plug-and-Play
The camera is physically connected to the PoE interface. Its parameters cannot be edited. You
can go to System → Network → TCP/IP to change IP address of PoE port.
Manual
Add IP camera without physical connection via network.
4. Enter IP address, User Name, and Password.
5. Click OK.
1.4.4 Add Network Camera via Customized Protocol
For network cameras that are not using standard protocols, you can configure customized
protocols to add them. The system provides 8 customized protocols.
Steps
1. Click on the main menu.
2. Go to More Settings → Protocol.
To Next Page
Loading...
Need help?
General
