HIKVISION iDS-TCE507-BR

4) Drag the two end points of the line or drag the whole line to adjust its posion according to
the actual scene.
5) Repeat the steps above to draw more lane lines.
4.
Click Start.
The auto calibraon starts, and you can view the calibraon status and progress. 100% means
the auto
calibraon is nished.
5.
Oponal: Click End if the calibraon eect has met the requirement during the process.
6.
Oponal: Click Copy Parameters to Coordinate Mode to copy the auto calibrated coordinates to
the coordinate mode.
7.
Click OK.
2.2.3 GPS
Calibraon
The coordinates of vehicle posions can be converted to GPS coordinates to sasfy the
requirements of third party or other
plaorms.
Steps
1.
Click GPS Calibraon.
Figure 2-4 GPS Coordinate Calibraon
2.
Enter the longitudes and latudes of the two calibraon points.
3.
Enter the coordinates of the two calibraon points.
Network Trac Camera Conguraon Manual
69