HIKVISION iDS-TCE507-BR

Chapter 3 View Real-Time Picture
You can view the real-me captured pictures and license plate informaon.
Steps
Note
The supported parameters vary with dierent models. The actual device prevails.
1.
Go to Live View → Real-Time Capture .
2.
Click Arming.
3.
Select an item from the list, and you can view the capture scene picture and recognized license
plate
informaon.
Figure 3-1 Real-Time Picture
4.
Oponal: You can also do the following operaons.
/
/
●
Level 1 Arming can only connect one client or web. The uploaded pictures
will not be stored in the storage card. The pictures in the storage card will be
uploaded to the level 1 arming.
●
Level 2 Arming can connect three clients or webs. The pictures will be
uploaded to the client/web, and stored in the storage card.
●
Disarming is to cancel the alarm status or real-me picture.
Network Trac Camera Conguraon Manual
71