HIKVISION iDS-TCM403-B/0832 User Manual

The higher the gamma correcon value is, the stronger the correcon strength is.
Black and White Mode at Night
When ICR is in night mode, you can check it to keep the video in black and white mode.
Enable Light Compensaon Correcon
The higher the value is, the stronger the light compensaon is.
Video
Brightness
It refers to the brightness the image.
Contrast
It refers to the contrast of the image. Set it to adjust the levels and permeability of the
image.
Shuer Speed
If the shuer speed is quick, the details of the moving objects can be displayed beer. If
the shuer speed is slow, the outline of the moving objects will be fuzzy and trailing will
appear.
Gain
It refers to the upper limit value of liming image signal amplicaon. It is recommended
to set a high gain if the
illuminaon is not enough, and set a low gain if the illuminaon is
enough.
Hue Range
Select the range to adapt to the display.
3D DNR
Digital Noise Reducon (DNR) reduces the noise in the video stream.
In Normal Mode, the higher the 3D DNR Level is, the stronger the noise will be reduced.
But if it is too high, the image may become fuzzy.
In Expert Mode, set
Spaal Intensity and Time Intensity. If the space domain intensity is
too high, the outline of the image may become fuzzy and the details may lose. If the me
domain intensity is too high, trailing may appear.
2D DNR
The higher the 2D DNR Level is, the stronger the noise will be reduced. But if it is too high,
the image may become fuzzy.
Video Standard
Select the video standard according to the actual power supply frequency.
Power Synchronizaon
The street lights and trac lights will cause image ashing in live view. Check it, and set Phase
Posion and Signal Frequency to overcome the image ashing in live view.
3.
Oponal: Click Capture Test to check the image.
Network Trac Camera Operaon Manual
24

HIKVISION iDS-TCM403-B/0832 Specifications

General

Brand	HIKVISION
Model	iDS-TCM403-B/0832
Category	Security Camera
Language	English