HIKVISION iDS-TCM403-B/0832 User Manual

Steps
1.
Go to Conguraon → System → System Sengs → Serial Port → RS-232 .
2.
Click Advanced Sengs.
Figure 7-2 Set RS-232
3.
Set Baud Rate, Data Bit, Stop Bit, etc.
Note
The parameters should be same with those of the connected device.
4.
Select Work Mode.
Console
Select it when you need to debug the device via RS-232 serial port.
Transparent Channel
Select it, and the network command can be transmied to RS-232 control command via the
RS-232 serial port.
Narrow Bandwidth Transmission
Reserved.
5.
Click Save.
Network Trac Camera Operaon Manual
39

HIKVISION iDS-TCM403-B/0832 Specifications

General

Brand	HIKVISION
Model	iDS-TCM403-B/0832
Category	Security Camera
Language	English