Figure 2-3 Cross Line Connection
Connect IP Camera to Internet via broad-band Router
The IP camera can be visited via Internet under this mode. Users need to configure IP Masquerade
(Virtual Server) as Figure 2-4.
Figure 2-4 DirectoryLine Connection
2.2 Modify IP Camera Configuration
The default IP for HIKVISION IP camera is 192.0.0.64, with 8000 as port number and admin / 12345
as default user name / password. The administrator can create up to 15 operators with separate privilege
settings.
To identify each IP camera, users need to modify each camera’s network parameters (IP, port number,
etc) via the SADP software in the attached CD.
Run SADP software and all the on-line devices will be listed with IP address, port number, serial
number, etc (Figure 2-5).
To Next Page
Loading...
