KB88113 Vandal-Resistant Video Intercom Doorbell User Manual
UM KB8113 Doorbell 021821NA 18
Basic Information
Click System Settings → Basic Information to enter the settings page. On the page, you can edit
Device Name and Device No. Set the Language and System Type according to your needs.
Click Save to enable the settings.
Time Settings
Click System Settings → Time Settings to enter the settings page. Select the Time Zone of your
location from the drop-down list.
• Enable NTP, set the Server Address, NTP Port, and Interval.
• Enable Manual Time Sync., set the time manually or check the Sync. with computer time.
Click Save to enable the settings.
DST
Click System Settings → DST to enable DST. Set the parameters according to your needs and click
Save to enable the settings.
Maintenance
Click Maintenance → Upgrade & Maintenance to enter the settings page.
Figure 7-2 Maintenance
• Reboot: Click Reboot to reboot the device.
• Restore: Click Restore to reset all the parameters, except the IP parameters and user
information, to the default settings.
Default
Click Default to restore all parameters to default settings.
• Export parameters:
1. Click Device Parameters to pop up the dialog box.
2. Set and confirm the encryption password.
3. Click OK to export parameters.
• Import Config. File:
To Next Page
Loading...
Need help?
General
