KB88113 Vandal-Resistant Video Intercom Doorbell User Manual
UM KB8113 Doorbell 021821NA 19
1. Click Browse to select the configuration file.
2. Click Import and enter the encryption password to import.
• Upgrade: Click Browse to select the upgrade file.
The upgrading process will last 1 to 10 minutes, do not power off during the
upgrading. The device reboots automatically after upgrading.
User Management
Click User Management to enter the settings page. Administrator can edit the permission for the
users.
STRONG PASSWORD RECOMMENDED − We highly recommend that you create a strong
password of your own choosing (using a minimum of eight characters, including at
least three of the following categories: upper case letters, lower case letters,
numbers, and special characters) in order to increase the security of your product.
We also recommend that you reset your password regularly. Especially in high
security systems, resetting the password monthly or weekly can better protect your
product.
Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
Online Users
Click User Management → Online Users to enter the page.
Figure 7-3 Online Users
Click Refresh to get the present information.
Arming/Disarming Information
Click User Management → Arming/Disarming Information to view the information. Click Refresh to
get the present information.
7.4.3 Network Settings
TCP/IP Settings
TCP/IP settings must be properly configured before you operate the device over network. The
device supports IPv4.
Click Network → Basic Settings → TCP/IP to enter the settings page.
To Next Page
Loading...
Need help?
General
