KB88113 Vandal-Resistant Video Intercom Doorbell User Manual
UM KB8113 Doorbell 021821NA 26
Figure 7-11 Day/Night Mode
• Set Day Mode or Night Mode manually.
• Set the mode as Auto and edit the sensitivity according to your needs.
• Set the mode as Scheduled-Switch. Set the start time and end time.
Daytime is from configured start time to configured time. The rest of the time is
set as night by default.
Set the backlight parameters.
Figure 7-12 Backlight
1) Check the checkbox to enable BLC.
2) Select BLC Area.
Click Save to enable the settings.
To Next Page
Loading...
