KB88113 Vandal-Resistant Video Intercom Doorbell User Manual
UM KB8113 Doorbell 021821NA 27
OSD Settings
You can customize the camera name, time/date format, display mode, and OSD size displayed on
the live view.
Click Image → OSD Settings to enter the settings page.
Check the corresponding checkbox to select the display of camera name, date, or week if
required.
Edit the Camera Name.
Select from the drop-down list to set the Time Format and Date Format.
Adjust the OSD position.
Click Save to enable the settings.
7.4.6 Event Settings
Motion Detection
Motion detection detects the moving objects in the configured surveillance area, and a series of
actions can be taken when the alarm is triggered.
Click Event → Motion to enter the settings page.
Figure 7-13 Motion Detection
Check Enable Motion Detection to enable the function.
Click Draw Area. Click and drag the mouse on the live video to draw a motion detection area.
Click Stop Drawing to finish drawing one area. Click Save to save the settings.
• Clear Area: Click Clear All to clear all of the areas.
To Next Page
Loading...
