HIKVISION KH6 Series - Time Synchronization

Figure 2-4 Synchronize Time
Select Time Zone or Enable NTP. Click Save to save the me sengs.
•
Time Zone
•
Select a me zone from the drop-down list menu.
•
Click Synchronizaon.
•
NTP
•
Check the checkbox of Enable NTP to enable NTP.
•
Enter the server address, NTP port, and synchronizaon interval.
•
DST
•
Check the checkbox of Enable DST to enable DST.
•
Enter the start
me and end me of DST, and set the DST bias.
Note
The default port No. is 123.
System Maintenance
Click System Maintenance to enter the page.
Network Indoor
Staon Conguraon Guide
22