HIKVISION Network Dome Camera User Manual

Installation Manual of Network Dome Camera
3
Chapter 2 Installation
NOTE:
1. Please check if all the items on the package list have been included with your
camera.
2. Read the following contents carefully before the installation.
3. Make sure that all the related equipment is power-off during the installation.
4. Check the power supply to prevent any damage caused by mismatching problems.
5. If the product does not operate properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the camera yourself. Users are
responsible for any problem caused by modification or repairing without
authorization.
2.1 Camera Description and Connection
Camera description:
Camera Connection:
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

HIKVISION Network Dome Camera Specifications

General

Lens	Varies by model (e.g., 2.8mm, 4mm, 6mm fixed lens; varifocal lens options available)
IR Range	Up to 30m (varies by model)
Video Compression	H.265+/H.265/H.264+/H.264
Power Supply	PoE (802.3af)
Operating Conditions	-30°C to 60°C (-22°F to 140°F)
Wide Dynamic Range (WDR)	120 dB
Ingress Protection	IP67
Vandal Resistance	IK10
Network Interface	RJ45 10/100Mbps Ethernet
Humidity	95% or less (non-condensing)