Quick Operation Guide of DS-7600NI-SE&V(P) Series NVR
20
camera is applied to the added camera.
Configuring Basic Parameters of IP Cameras
After the adding of the IP cameras, the basic information of the camera lists in the page, and you can configure the
basic setting of the IP cameras.
Steps:
1. Click the icon to edit the parameters; you can edit the IP address, protocol and other parameters.
Edit the Parameters
2. Click apply to save the settings and click OK to exit the editing interface.
To edit more parameters:
1. Click the Advance Set icon.
Network Configuration of the Camera
2. You can edit the network information and the password of the camera.
3. Click Apply to save the settings and click OK to exit the interface.
Explanation of the icons:
To Next Page
Loading...
