Need help?Do you have a question about the HIKVISION HiLook NVR 108MH-C/8P and is the answer not in the manual?
General| Model | HiLook NVR 108MH-C/8P |
|---|---|
| Channel Input | 8 |
| IP Video Input | 8 |
| Video Input Bandwidth | 80 Mbps |
| Incoming Bandwidth | 80 Mbps |
| Outgoing Bandwidth | 80 Mbps |
| Decoding Format | H.265+/H.265/H.264+/H.264 |
| Two-Way Audio | Yes |
| Storage Capacity | Up to 10TB per HDD |
| Power Supply | DC 48V |
| Operating Humidity | 10% to 90% (non-condensing) |
| HDMI Output Resolution | 4K (3840x2160) |
| VGA Output Resolution | 1920 × 1080 |
| Decoding Capability | 8CH@1080P |
| Audio Output | 1CH |
| SATA | 2 |
| Network Interface | 1 × 10/100/1000 Mbps Ethernet |
| PoE Interface | 8 (10/100 Mbps) |
| USB Interface | 2 USB 2.0 |
| Power Consumption | ≤25W (without HDD) |
| Working Temperature | -10°C to +55°C |
| Recording Resolution | 8MP/6MP/5MP/4MP/3MP/1080p/720p |
Covers essential safety precautions for device operation, including power, earthing, and handling.
Details safety measures for battery insertion, replacement, and disposal to prevent hazards.
Guides users through the initial device activation process by setting an admin password.
Explains how to search for and retrieve recorded video, picture, or event files.
Guides on connecting the device to the HiLookVision mobile app and platform.
Provides access to camera management settings for easy mode configuration.
Covers initializing HDDs and adding network disks for video storage.
Configures continuous and event-triggered recording schedules for cameras.
Sets main stream, sub-stream, frame rate, and resolution parameters for recording.
Configures TCP/IP network settings, including working modes and parameters.
Adds and manages network cameras using expert configuration options.
Sets up motion detection zones, sensitivity, and linkage actions for cameras in expert mode.
Configures line crossing detection rules, direction, and areas for perimeter protection.
Sets up intrusion detection zones, time thresholds, and sensitivity for smart events.
Configures region entrance detection rules and areas for monitoring object entry.
Sets up region exiting detection rules and areas for monitoring object exit.
Sets schedules for when event detection and alarms are active.
Configures alarm pop-up windows to display live video of alarming channels.
Covers accessing the device via web browser, including plugin installation and login procedures.
Describes accessing live view and playback interfaces through the web browser.
To Next Page